- Home
- Job guides
- Gas line installation
Job guide / plumber
Running a gas line: what sets the price
A new gas line to a range, dryer, fireplace or generator is priced on length, route and whether the existing system can carry the added load. It is permitted, pressure-tested work everywhere we looked: Reno's flat residential gas line permit is $90.00, Portland charges $25.00 for up to four outlets under a $167.00 minimum, and Grand Rapids $5.00 per opening plus a $52.00 application.
Sizing comes before pricing
Gas piping is sized like a tree. The trunk at the meter has to carry every appliance in the house running at once, and each branch has to carry what hangs off it, over its length. Adding an appliance at the far end of an already loaded branch can mean the pipe upstream is too small. A fitter who quotes without adding up the appliance inputs and measuring the runs is guessing, and the guess that fails means a range that will not hold a flame when the furnace kicks on.
The other limit is the meter. A large added load, a standby generator being the usual case, may need the utility to change the meter or raise delivery pressure. That is the utility's work, on its timeline, sometimes at its price.
What takes the hours
- Length and route. A tee in an open basement ceiling and a short drop is small. A run through finished ceilings, up an exterior wall or across a yard is not.
- Material. Threaded steel pipe is cut and threaded piece by piece. Flexible stainless tubing pulls like cable and goes in far faster, but must be bonded as its maker requires. Buried lines use rated plastic pipe with tracer wire.
- Trenching, for a line to a detached building, pool heater or grill. Request a utility locate first; 811 is free and needs a few business days.
- Testing. The new piping is capped and pumped up with air, and the gauge has to hold for the inspector. If it drops, the fitter hunts for the joint.
| National wage point | Wage / hr | Loaded / hr | Implied billed hr, 15.5% margin | Implied billed hr, 29.9% margin | One worker-day (8 hr) at 29.9% |
|---|---|---|---|---|---|
| 25th percentile | $24.13 | $34.71 | $41.06 | $49.51 | $396 |
| Median | $30.67 | $44.12 | $52.18 | $62.93 | $503 |
| 75th percentile | $40.92 | $58.86 | $69.62 | $83.97 | $672 |
See plumber wages for every metro.
Permit lines
| City | Line on the schedule | Fee | Schedule |
|---|---|---|---|
| Reno, NV | Residential EZ permit: gas line | $90.00 | EZ Permits and Miscellaneous Fees, effective July 1, 2026 |
| Portland, OR | One and two family dwelling mechanical permit, minimum fee | $167.00 | Mechanical Permit Fee Schedule, effective July 10, 2026 |
| Portland, OR | Fuel piping, up to 4 outlets | $25.00 | Mechanical Permit Fee Schedule, effective July 10, 2026 |
| Portland, OR | Fuel piping, each outlet over 4 | $4.29 | Mechanical Permit Fee Schedule, effective July 10, 2026 |
| Grand Rapids, MI | Plumbing permit application, includes 1 inspection | $52.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
| Grand Rapids, MI | Plumbing: gas piping, per opening | $5.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
Notice that Portland files gas piping under its mechanical schedule and Grand Rapids under plumbing. Which license may do the work also varies by state. Ask the bidder what license they hold for gas and check it with the state board.
Comparing bids
The bids should show the appliance being served and its input, the pipe material and size, the route, the test, the permit, and who connects the appliance. "Run gas line" with a single price is not enough to compare.
Never accept a bid that suggests skipping the permit on gas. The FTC lists a contractor who asks you to get the required permits yourself among the signs of a scam, and on gas the inspection is the one independent check you get.
Why did the plumber say my whole line needs to be bigger?
The existing pipe was sized for the appliances the house had. Add a large one and the shared sections may no longer deliver enough. Ask to see the load and length figures behind the claim.
What does the gas permit cost?
On the schedules we opened: $90.00 in Reno, $25.00 for up to four outlets in Portland with $4.29 for each one beyond, and $5.00 per opening in Grand Rapids on top of the application fee.
Related guides
- Bathroom remodel
- Heat pump water heater installation
- Lawn sprinkler system installation
- Sewer line replacement
- Tile shower installation
- Water heater replacement
Sources
- BLS Occupational Employment and Wage Statistics, May 2025 metropolitan, state and national files
- BLS Employer Costs for Employee Compensation, June 2026, Table 4 (private industry by occupational and industry group)
- NAHB Eye on Housing, Remodelers Saw Profit Margin Gains in 2024 (Remodelers' Cost of Doing Business Study)
- Aswath Damodaran, NYU Stern, Margins by Sector (US), data as of January 2026
- BLS Producer Price Index commodity data and CPI-U, retrieved through the BLS public data API
- Reno, NV: EZ Permits and Miscellaneous Fees, effective July 1, 2026
- Portland, OR: Mechanical Permit Fee Schedule, effective July 10, 2026
- Grand Rapids, MI: Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026
- 811 is free
- asks you to get the required permits yourself